AMC-Wafer-BTi
3.5" SBC supports Intel® 22nm Atom™/Celeron® onboard SOC with VGA/LVDS/iDP, Dual Intel GbE, PCIe Mini, USB 3.0, SATA 3Gb/s, Audio, iRIS-1010

AMC-Wafer-BTi

Features:

  1. 3.5" form factor supports Intel 22nm Atom onboard SOC
  2. Unique Heatspreader/Tray design for ease of product integration
  3. Dual Independent display support
  4. 1333/1066MHz 1.35V DDR2L SDRAM supporting up to 8GB
  5. COM, USB 3.0, SATA 3GB/s, PCIe Mini, mSATA and Audio support
  6. Support for IPMI 2.0 with iRIS-1010 module
Specification

SoC:
Intel® Atom™ E3845 on-board SoC (1.91GHz, quad-core, 2MB cache, TDP=10W)
Intel® Atom™ E3827 on-board SoC (1.75GHz, dual-core, 1MB cache, TDP=8W)
Intel® Atom™ E3826 on-board SoC (1.46GHz, dual-core, 1MB cache, TDP=7W)
Intel® Atom™ E3825 on-board SoC (1.33GHz, dual-core, 1MB cache, TDP=6W)
Intel® Atom™ E3815 on-board SoC (1.46GHz, single-core, 512KB cache, TDP=5W)
Intel® Celeron® J1900 on-board SoC (2GHz, quad-core, 2MB cache, TDP=10W)
Intel® Celeron® N2930 on-board SoC (1.83GHz, quad-core, 2MB cache, TDP=7.5W)
Intel® Celeron® N2807 on-board SoC (1.58GHz, dual-core, 2MB cache, TDP=4.3W)

BIOS:
AMI UEFI BIOS

Memory:
One 204-pin 1066/1333 single-channel DDR3L SO-DIMM supported (system max. 8GB)

Graphics Engine:
Intel® HD Graphics Gen 7 Engines with 4 execution unit, supports DX11.1, OpenGL 4.2 and OpenCL1.2

Display Output:
Dual Independent Display
1 x VGA (Resolution: 1600x1200@60Hz)
1 x 24-bit dual-channel LVDS connector (1920x1200@60Hz)
1 x iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 3840x2160@60 Hz)

Ethernet:
LAN1: Intel® I210-AT PCIe controller with NCSI support
LAN2: Intel® I211-AT PCIe controller

Super I/O:
Fintek F81866

Embedded Controller:
ITE IT8528E

I/O Interface:
1 x PS/2 KB/MS
2 x SATA
3Gb/s with 5V SATA power connector (no RAID)
1 x USB 3.0 (on rear I/O)
5 x USB 2.0 (1 on rear I/O, 4 by pin header)
1 x RS-422/485 (by pin header)
3 x RS-232 (1 on rear I/O, 2 by pin header)

SMBus:
1 x 4-pin (1x4) wafer

Audio:
Realtek ALC662 HD codec
1 x Analog audio by 10-pin (2x5) header

Front Panel:
1 x 6-pin wafer for power LED & HDD LED
1 x 2-pin wafer for power button
1 x 2-pin wafer for power reset

LAN LED:
2 x 2-pin (1x2) header

Expansion:
1 x Full-size PCIe Mini card slot with mSATA support (SATA2 and mSATA share SATA signal)

iRIS Remote Management Module:
1 x iRIS-1010 slot

Digital I/O:
8-bit digital I/O (4-bit input, 4-bit output)

Fan Connector:
1 x 4-pin CPU fan connector
1 x 4-pin system fan connector

Power Supply:
12V DC input only (AT/ATX support)

Watchdog Timer:
Software programmable, support 1~255 sec. system reset

Power Consumption:
+12V@1.45A (Intel® Celeron® J1900 CPU, 1 x 8GB 1333 MHz DDR3 memory)

Operating Temperature:
-20°C ~ 60°C

Storage Temperature:
-30°C ~ 70°C

Operating Humidity:
5%~95%, non-condensing

Dimensions:
146mm x 102mm

Weight:
GW:600g/ NW:250g

Ordering Information

  • AMC-Wafer-BT-i1-J1900 (p/n: TB002975F): 3.5" SBC supports Intel 22nm Quad-Core Celeron J1900 @ 2.0GHz (10W TDP) on-board SoC with VGA/LVDS/iDP, Dual GbE, PCIe Mini, USB 3.0, SATA 3GB/s, mSATA, COM, Audio, iRIS-1010 Integrated Heatspreader/Tray
  • AMC-Wafer-BT-i1-N29301 (p/n: TB002976F): 3.5" SBC supports Intel 22nm Quad-Core Celeron N2930 @ 1.86GHz (7.5W TDP) on-board SoC with VGA/LVDS/iDP, Dual GbE, PCIe Mini, USB 3.0, SATA 3GB/s, mSATA, COM, Audio, iRIS-1010 Integrated Heatspreader/Tray
  • AMC-Wafer-BT-i1-N28071 (p/n: TB002977F): 3.5" SBC supports Intel 22nm Dual-Core Celeron N2807 @ 1.58GHz (4.3W TDP) on-board SoC with VGA/LVDS/iDP, Dual GbE, PCIe Mini, USB 3.0, SATA 3GB/s, mSATA, COM, Audio, iRIS-1010 Integrated Heatspreader/Tray