1. EPIC form factor with Intel® D2550/N2600 dual-core processor supporting DDR3/DDR3L (1.35V) memory
2. Wide range 9V ~ 28V DC input design
3. Flexible VGA, dual LVDS and HDMI with dual-display support
4. Supports PC/104-Plus and PCIe Mini card slot compatible with mSATA SSD storage
5. Complete I/O with six USB, two SATA 3Gb/s, four COM and audio
6. IEI One Key Recovery solution allows you to create rapid OS backup and recovery

• Intel® dual core Atom™ D2550 1.86GHz processor
  Intel® dual core Atom™ N2600 1.6GHz processor
  Intel® dual core Atom™ N2800 1.86GHz processor (optional)

• Intel® NM10

• UEFI BIOS

• 1 x 1066MHz DDR3 SO-DIMM supporting up to 4GB (for D2550 and N2800)
  1 x 800MHz DDR3 SO-DIMM supporting up to 2GB (for N2600)

• Dual GbE by Realtek RTL8111E controllers

• 3 x RS-232
• 1 x RS-422/485
• 4 x USB 2.0
• 1 x microSD (Only for boot up to DOS)
• 2 x USB 3.0
• 1 x 6-pin wafer for PS/2 KB/MS
• 2 x SATA 3Gb/s with 5V power connector (SATA1 and mSATA shares SATA signal)

• 1 x 4-pin wafer connector

• Realtek ALC662 HD audio codec

• Dual display supported
  1 x VGA (up to 1920 x 1200 @60Hz)
  (Due to Intel GMA driver limitation, the monitor connected to the VGA connector may not have signal to it or become extended desktop after restarting from the graphics driver installation. To solve this problem, press the Ctrl+Alt+F1 hotkey to switch the primary screen to CRT mode.)
  1 x HDMI (up to 1920 x 1200 @60Hz)
  LVDS1 integrated in the D2550/N2600
  Single-channel 24-bit LVDS by D2550, resolution support up to 1440x900 @60Hz
  Single-channel 18-bit LVDS by N2600 and N2800, resolution support up to 1366x768 @60Hz
  LVDS2 supports 24-bit dual-channel by CH7511 DP to LVDS converter, resolution support up to 1920x1200 for D2550, 1600x1200 for N260/N2800

• 1 x PCIe Mini card (compatible with mSATA SSD device) (SATA1 and mSATA shares SATA signal)
  1 x PC/104 slot (ISA)
  1 x PCI/104 slot (PCI)

• Software programmable supports 1~255 sec. system reset

• Maximum input voltage range: 9V ~ 28V
  Recommended operating input voltage range: 12V ~ 24V
  One internal 4-pin (2x2) power connector

• 12V@2.1A (Intel® D2550 1.86GHz CPU with 1333MHz 2GB DDR3 memory)
  12V@1.72A (Intel® N2600 1.6GHz CPU with 1333MHz 2GB DDR3 memory)

• GMA 3650 at 640MHz graphics core speed (for N2550 and N2800)
  GMA 3600 at 400MHz graphics core speed (for N2600)

• 8-bit GPIO

• -20°C ~ 60°C with free air, -20°C ~ 70°C with force air for D2550 processor -20°C ~ 70°C with free air, -20°C ~ 75°C with force air for N2600/N2800 processor

• Operation: 5% to 95% non-condensing

• 670g / NW: 350g

• 1 x 3-pin CPU fan connector
  1 x 3-pin system fan connector

AMC-NANO-CV-N26001-R10 (p/n: TB002945F):
EPIC SBC with Intel Atom N2600 @ 1.6GHz/1MB cache, DDR3, VGA/HDMI/Dual LVDS, Dual GbE, mSATA, Audio, SATA 3GB/s

AMC-NANO-CV-N28001-R10 (p/n: TB002946F):
EPIC SBC with Intel Atom N2800 @ 1.86GHz/1MB cache, DDR3, VGA/HDMI/Dual LVDS, Dual GbE, mSATA, Audio, SATA 3GB/s (MOQ of 100 pcs)