AMC-ABT-i2
Mini-ITX Industrial Motherboard supports Intel® 22nm Atom™/Celeron® on-board SOC, VGA/HDMI/iDP, Dual Intel PCIe GbE, USB 3.0, SATA, HD Audio, iRiS-2400

AMC-ABT-i2

Features
  • Mini-ITX SBC supports Intel® 22nm Atom™ or Celeron® on-board SoC
  • 1066/1333 MHz 1.35V DDR3L SDRAM supported up to 8GB
  • Supports dual independent display with VGA, HDMI and iDP
  • COM, USB 3.0, SATA, PCIe Mini, mSATA and HD Audio support
  • Supports IPMI 2.0 via iRIS-2400 module
  • Supports Intel® VT-x technology
  • IEI One Key Recovery solution allows you to create rapid OS backup and recovery
Specification

CPU
  • Intel® Atom™ E3845 on-board SoC
    (1.91GHz, quad-core, 2MB cache, TDP=10W)
    Intel® Atom™ E3827 on-board SoC
    (1.75GHz, dual-core, 1MB cache, TDP=8W)
    Intel® Atom™ E3826 on-board SoC
    (1.46GHz, dual-core, 1MB cache, TDP=7W)
    Intel® Atom™ E3825 on-board SoC
    (1.33GHz, dual-core, 1MB cache, TDP=6W)
    Intel® Atom™ E3815 on-board SoC
    (1.46GHz, single-core, 512KB cache, TDP=5W)
    Intel® Celeron® J1900 on-board SoC
    (2GHz, quad-core, 2MB cache, TDP=10W)
    Intel® Celeron® N2930 on-board SoC
    (1.83GHz, quad-core, 2MB cache, TDP=7.5W)
    Intel® Celeron® N2807 on-board SoC
    (1.58GHz, dual-core, 2MB cache, TDP=4.3W)
BIOS
  • AMI UEFI BIOS
    BIOS version: AIxx is for Bay-trail I model (CPU: E38xx)
    BIOS version: AMxx is for Bay-trail M/D model (CPU: J1900/ N2930/ N2807)
System Memory
  • Two 204-pin 1066/1333MHz dual-channel DDR3L SO-DIMM support up to 8 GB (J1900, N2930, E3845, E3827, E3826) or 4 GB (N2807, E3825, E3815)
Ethernet
  • LAN1: Intel® I210-AT PCIe controller with NCSI support (for iRIS solution)
    LAN2: Intel® I211-AT PCIe controller
I/O Interface
  • 1 x PS/2 KB/MS
  • 1 x microSD slot (E38XX SKU only)
  • 2 x USB 3.0 (on rear I/O)
  • 6 x USB 2.0 (2 on rear I/O, 4 by pin header)
  • 1 x RS-422/485 (by pin header)
  • 5 x RS-232 (2 on rear I/O, 3 by pin header)
  • 2 x SATA 3Gb/s with 5V SATA power connector (no RAID)
Digital I/O
  • 8-bit digital I/O (4-bit input, 4-bit output)
Super I/O
  • Fintek F81866D-I
TPM
  • 1 x TPM connector (2x10 pin)
SMBus
  • 1 x 4-pin (1x4) wafer
Audio
  • Realtek ALC662 HD codec supports 5.1 channel
 


Display Interfaces
  • Dual Independent Display
    VGA (up to 2560x1600@60Hz)
    HDMI (up to 2560x1600@60Hz)
    iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 2560x1600@60Hz)
Expansion
  • 1 x Full-size PCIe Mini card slot (supports mSATA, co-lay SATA port 2)
    1 x PCIe x4 slot (PCIe x1 signal)
Watchdog Timer
  • Software programmable, supports 1~255 sec. system reset
Power Supply
  • ATX power supply
Power Consumption
  • 5V@1.71A, 12V@0.08A, Vcore_12V@0.27A, 3.3V@0.34 (Intel® Celeron® J1900 CPU, 2 x 4GB 1333 MHz DDR3 memory)
Graphic
  • Intel® HD Graphics Gen 7 Engines with 4 execution units, supporting DX11.1, OpenGL 4.2 and OpenCL1.2
Operating Temperature
  • -20°C ~ 60°C
Storage Temperature
  • -30°C ~ 70°C
Humidity
  • 5% ~ 95%, non-condensing
Dimensions
  • 170mm x 170mm
Weight
  • 900g/NW: 450g
Front Panel
  • 1 x 6-pin (1x10) wafer for power LED & HDD LED
    1 x 2-pin (1x2) wafer for power button
    1 x 2-pin (1x2) wafer for power reset
I2C
  • 1 x 4-pin (1x4) wafer
Fan Connector
  • 1 x 4-pin smart fan connector
    1 x 4-pin system fan connector
iRIS Remote Management Module
  • 1 x iRIS-2400 slot
LAN LED
  • 2 x 2-pin (1x2) header
Ordering Information

AMC-ABT-i2-J19001 (p/n: TB003065A):
Mini-ITX SBC supports Intel Celeron quad-core processor J1900 (10W), VGA/HDMI/iDP, dual Intel PCIe GbE, SATA, USB 3.0, HD Audio, iRIS-2400 and RoHS

AMC-ABT-i2-N29301 (p/n: TB003066A):
Mini-ITX SBC supports Intel Celeron quad-core processor N2930 (7.5W), VGA/HDMI/iDP, dual Intel PCIe GbE, SATA, USB 3.0, HD Audio, iRIS-2400 and RoHS

AMC-ABT-i2-N28071 (p/n: TB003067A):
Mini-ITX SBC supports Intel Celeron dual-core processor N2807 (4.3W), VGA/HDMI/iDP, dual Intel PCIe GbE, SATA, USB 3.0, HD Audio, iRIS-2400 and RoHS