Product Overview
The AMC-3300 is specifically designed to adapt to various power supply conditions in a
vehicle application. The user can control and manage the system's power, such as setting
the system to boot after the car engine is started, keep the system running after car
engine is turned off or even switch to an optional power source from back-up battery.
The AMC-3300 in-vehicle system provides an out of the box solution offering immediate
implementation. With it's rugged design the system is designed to withstand a wide range
of both vibration and temperature. The unit also has space to integrate a GSM/GPRS and
GPS function board. There is also the optional module with SMA and FME connectors for
antenna and digital I/O for customised requirements.
Specification
- Main Board: ICES 101 ETX Module
Supports ETX Module with Intel® Pentium® M/ Celeron® M processor, VGA / ISA / PCI / IDE / LVDS / Audio / COM / LPT / USB2.0 / LAN interface
- Main Memory: 1 x 200-pin SO-DIMM socket for up to 1GB Non-ECC Non-Registered DDR SDRAM memory
- I/O Interface Front:
Power / HDD Status LEDs1 LED, connect to GPIO, programmable for alarm or other application specific purposes
1 x PCMCIA
1 x External access CompactFlash socket (2nd CompactFlash)
1 x USB 2.0
1 x System Reset button
1 x System Power-on Switch
Audio output with 1x RJ-11 to headset
1 x GSM SIM-Card socket (COM1)1 x Reset button for integrated GSM/GPRS and GPS Module (COM2)
Antenna Mounting Holes for 2x SMA-type (WLAN and GPS) and 1x FME-type(GSM)
- I/O Interface Rear:
4 x COM ports:
2 x DB9 for COM3 and COM4 (Support RS-232)
1 x screw terminal for COM5 and COM6 (Support RS-422/485)
1 x RJ45 with LED for 10/100M bps Ethernet
2 x USB 2.0 ports
1 x DB15 VGA
1 x DB26 for LVDS, 1x USB 2.0 and back-light voltage
1 x DB9 Female for digital I/O with 4-input and 4-output
Audio interface with Line-in, Line-out, and Mic-in
+6 to +36VDC power input with 3-pin power input connector ignition and ground
+5 VDC and +12VDC power output to turn on/off fan with thermal control
- Device:
1 x Front Access PCMCIA socket / CompactFlash socket
1 x Internal CompactFlash socket
1 x Internal 1.8"/2.5" HDD drive bay
1 x NVRAM socket
|
|
Click to enlarge
- Expansion Slot:
1 x Cardbus PCMCIA socket
1 x PC/104+, with PC/104 x1 (ISA) and PCI 104 x1 (PCI)
1 x Mini-PCI socket
- Dimensions: 260 mm (W) x 176 mm (D) x 70 mm (H)
- Construction: Aluminium chassis with fan-less design
- Environment:
Operating temperature:
Ambient with air flow : -10°C to 50°C (with CF)T-case (Surface Temperature of Chassis): -10 °C ~ 55 °C (CF)
NICE 3200 Tcase (Surface Temperature of Chassis)/5°C to 40°C (W/HDD)/0°C to 45°C (W/CF card only)
Storage temperature: -20°C to 80°C
Relative humidity: 10% to 90% (Non-condensing)
Vibration: Operating: MIL-STD-810F, Method 514.5, Category 20, Ground Vehicle -Highway Truck (within Anti-vibration bracket)Storage: MIL-STD-810F, Method 514.5, Category 24, Integrity Test (within Anti-vibration bracket)
Shock: Operating: MIL-STD-810F, Method 516.5, Procedure I, Trucks and semitrailers= 20g (within Anti-vibration bracket)Crash Hazard: MIL-STD-810F, Method 516.5, Procedure V, Ground equipment = 75g (within Anti-vibration bracket)
- Certifications:
CE approval
FCC Class A
- Dimensions: 260(W) x 176(D) x 55(H)
- Device:
Front Access PCMCIA socket x 1/CompactFlash socket x 1
Internal CompactFlash socket x 1
Internal 2.5" HDD Drive bay x 1
- Certifications:
CE approval
FCC
e Mark
Ordering Information
AMC-3300 (p/n: LF000483):
Fanless 101 ETX Module; Intel® Pentium® M and Celeron® M processor 1 x SO-DIMM socket for up to 1GB DDR SDRAM memory2 x RS-232 and 2 x RS-422/485 (Automatic Flow Control and Isolation)Built-in Power Ignition control
|
