• Support Intel® Pentium® M/ Celeron® M Processors
• Intel® 910GMLE chipsets
• Dual 10/100/1000 LAN Ports
• USB2.0/VGA/DVI Interface
• 3x RS232 and 1x RS232/422/485 via DB44 Connector
• On-board DC to DC Power Designed to Support +16 - 30 VDC Power Input
• Supports ATX Power Mode and PXE/WOL
• One PCI Expansion Slot

• Main Board:
  • NISB3100
  • Support Intel® Pentium® M/ Celeron® M processors
  • Supports Low Voltage and Ultra Low Voltage Intel® Pentium® M or Celeron® M
  • Supports 400 MHz FSB CPUs only
  • Intel® 910GMLE and ICH6M chipsets
• Main Memory: 2x 240-pin DDR2 DIMM socket, up to 2GB un-buffered non-ECC DDR2 400 SDRAM module
• Expansion:
  • Supports one 32-bit/33 MHz PCI card
  • PCI length support: Max. 169mm with HDD installed
• I/O Interface-Front:
  • Optional customized logo
  • HDD Access/Power/LAN status LEDs
  • 2 x USB2.0 ports
  • ATX Power on/off switch
• I/O Interface-Rear:
  • 1 x PS/2 Keyboard/ Mouse
  • 4 x USB2.0 ports/ 4x Serial port
  • 1 x Audio Mic-in and 1x Speaker-out
  • 1 x DVI interface
  • 2 x 10/100/1000 LAN
  • 1 x VGA connector
  • 16 ~ 30V DC power input
  • 1 x 2-pin connector output for remote power on/off switch
• Device:
  • 1x On-board Internal Compact Flash socket
  • 1x Internal 2.5" SATA HDD driver bay

• Power Requirements:
  • DC to DC power on-board to support of 16 V to 30 VDC (Max: 120 Watts) input
  • 1 x Optional 120 W AC adapter (lockable)
  • Power input: 100 to 240 V AC 2 A 50/60 Hz
  • Power output: 19 VDC
• Dimensions: 195mm (W) x 268mm (D) x 80mm (H)
  (7.6" x 10.5" x 3.1")
• Construction: Aluminium chassis with fan-less design
• Environment:
  • Operating temperature: Ambient with air flow: -5°C ~ 55°C
    (According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14)
  • Storage temperature: -20°C ~ 80°C
  • Relative humidity: 10% to 93% (Non-Condensing)
• Certifications:
  • CE approval
  • FCC

120W Power Adapter (p/n: PG002641):
External 120W AC Power Adapter